V-Belt/Sheave Groove Gauge

V-Belt/Sheave Groove Gauge

#ad
#ad
TB WOOD'S #ad - Groove gauge, for use with v-belts and sheaves, material plastic ' Price for: each for use with: v-belts and sheaves Item: Groove Gauge Material: Plastic Country of Origin subject to change: United States.

More information about TB WOOD'S #ad

Browning Groove Gauge, Plastic

#ad
#ad
Regal 2695179 #ad - Made in USA. Plastic Groove Gauge. Gauge used to check for worn sheaves. Gauge used to help save energy.

More information about Regal 2695179 #ad


Similar products



Browning 1302546 Belt Tension Checker, Steel

#ad
#ad
Regal 1302546 #ad - Indicates tension on all V-belt drives. Proper tensioning is necessary to avoid premature belt wear. Made in USA. Adjustable to 10" to 170" belt span and up to 35 pounds of tension. Adjustable for 10" to 170" belt span and up to 35 pounds of tension. Indicates tension on all v-belt drives 3l, a, cX, 4L, b, 5L, bx, 5V, 3V, AX, c, 8V.

Compact, spring loaded design. Easy to operate; instructions included. Compact, spring loaded design. Gauge used to help save energy. Easy to operate; step-by-step instructions included. Gauge used to check for worn sheaves.

More information about Regal 1302546 #ad


Similar products



Gates 7401-0076 Pencil Type Tension Tester, 30 lbs Deflection Force

#ad
#ad
Gates 7401-0076 #ad - The company, is headquartered in Denver, founded in 1917, CO. Easy to operate; instructions included. Maximum deflection force of 30 lb. Ensures proper belt tension for increased life of drive belt. Indicates tension on all v-belt drives 3l, 4l, CX, 5V, c, 5L, 3V, bx, A, AX, b, 8V. Compact, spring loaded design.

Made in USA. Proper tensioning is necessary to avoid premature belt wear. This single-barrel tension tester is suitable for maintaining power transmission systems in a range of industrial settings. Gates manufactures power transmission and fluid transfer components and systems. Adjustable for 10" to 170" belt span and up to 35 pounds of tension.

Gates 7401-0076 Pencil Type Tension Tester, 30 lbs Deflection Force #ad - It can measure a deflection force up to 30 lb. Ensuring that the proper amount of belt tension is applied for increased life of the drive belt. Gauge used to help save energy. This gates 7401-0076 single-barrel tension tester is suitable for use with small V-belts and synchronous belts in power transmission systems.

Single-barrel tension tester for use with small V-belts and synchronous belts. Gauge used to check for worn sheaves.

More information about Gates 7401-0076 #ad


Similar products



CyberTech Reflective Tape for Optical and Laser Non-Contact Digital Photo Tachometers Tach RPM- 10 strips

#ad
#ad
CyberTech tach-mtr-strapx10 #ad - 10 strips of reflective tape for optical and laser tachometers, specially formulated self adhesive reflective tape for use as a target for optical tachometers. High performance adhesive backing will stick to most surfaces. It will improve the detection of the rotating object from a wide range of angles and distances.

Specially made for use with optical and laser tachometers and revolution counters. Its highly reflective surface is designed to retro reflect the light infrared, laser or visible emitted by the optical tachometer. Gauge used to help save energy. Maximum deflection force of 30 lb. Ensures proper belt tension for increased life of drive belt.

CyberTech Reflective Tape for Optical and Laser Non-Contact Digital Photo Tachometers Tach RPM- 10 strips #ad - Adjustable for 10" to 170" belt span and up to 35 pounds of tension. Wide angle reflectivity tape, 10 strips, each 8 inches x 05 inch 20 cm x 1. 2 cm. It will work with any laser or photo tachometer offered on amazon. Easy to operate; instructions included. Its highly reflective surface is designed to retro reflect the light infrared, laser or visible emitted by the optical tachometer.

More information about CyberTech tach-mtr-strapx10 #ad


Similar products



HVAC 8-in-1 Slide Drive Screwdriver/Nut Driver Klein Tools 32596

#ad
#ad
Klein Tools 32596 #ad - Specially made for use with optical and laser tachometers and revolution counters. Gauge used to help save energy. Easy to operate; instructions included. Great for hvac applications including thermostat installation and control work. Includes 1/4-inch, 3/8-Inch hollow nut drivers. Wide angle reflectivity tape, 10 strips, each 8 inches x 0

HVAC 8-in-1 Slide Drive Screwdriver/Nut Driver Klein Tools 32596 #ad - 5 inch 20 cm x 1. 2 cm. Includes 1/4-inch and 3/8-inch hollow nut drivers, as well as #2 Phillips, 1/8-Inch 3 mm and 1/4-Inch 6 mm slotted screwdriver tips. Klein isn't just the name of our company, it's also our family name. Convenient thumb nut locks tip setting. Proper tensioning is necessary to avoid premature belt wear.

Made in USA. Klein tools doesn't just make great products, we make great products that stand up to the demands of the professionals who use them every day. Unique, patented head slides back and forth to switch from 1/4-Inch to 5/16-Inch magnetic hex-head screwdriver. U. S.

More information about Klein Tools 32596 #ad


Similar products



Refrigeration Technologies RT200R Nylog- Gasket/Thread Sealant

#ad
#ad
Refrigeration Technologies RT200R #ad - Wide angle reflectivity tape, 10 strips, each 8 inches x 05 inch 20 cm x 1. 2 cm. Nylog red is based on mineral oil and used on Ammonia, Propane, CFC or HCFC systems. Gauge used to help save energy. Specially made for use with optical and laser tachometers and revolution counters. Will never harden or dry will not clog or contaminate Systems Fully Compatible and Miscible Used and Recommended by OEM’s Gauge used to check for worn sheaves.

. Maximum deflection force of 30 lb. Ensures proper belt tension for increased life of drive belt. Its highly reflective surface is designed to retro reflect the light infrared, laser or visible emitted by the optical tachometer. Single-barrel tension tester for use with small V-belts and synchronous belts. Indicates tension on all v-belt drives 3l, 4l, b, 5L, A, 5V, 3V, AX, CX, bx, c, 8V.

Refrigeration Technologies RT200R Nylog- Gasket/Thread Sealant #ad - Compact, spring loaded design. Nylog is fully miscible and 100% compatible with the refrigerant and base compressor oils. Nylog red: is based on mineral oil and used on Ammonia, Propane, CFC or HCFC systems. Unique, patented head slides back and forth to switch from 1/4-Inch to 5/16-Inch magnetic hex-head screwdriver.

It’s a sealant: nylog is a viscoelastic fluid made from refrigeration grade compressor oil.

More information about Refrigeration Technologies RT200R #ad


Similar products



99,999 RPM Accuracy | Batteries Included - Neiko 20713A Digital Tachometer, Non Contact Laser Photo | 2.5

#ad
#ad
Neiko 20713A #ad - Cushion-grip handle for greater torque and comfort. Auto zero adjustment. Stores last, minimum, and maximum readings. Made in USA. High performance adhesive backing will stick to most surfaces. Readings are displayed on a large, easy-to-read LCD screen; stores last, minimum, and maximum reading; features auto-zero adjustment.

Includes 24-inches of reflective tape and aim and measure design for non-contact diagnostics and measurements. Runs on 3 AA batteries, included. Adjustable for 10" to 170" belt span and up to 35 pounds of tension. Wide angle reflectivity tape, 10 strips, each 8 inches x 05 inch 20 cm x 1. 2 cm. Laser wavelength 650 nm.

99,999 RPM Accuracy | Batteries Included - Neiko 20713A Digital Tachometer, Non Contact Laser Photo | 2.5 #ad - Indicates tension on all v-belt drives 3l, 4l, 5L, c, A, bx, b, AX, 5V, 3V, CX, 8V. Compact, spring loaded design. Compact and lightweight, operates for hours on three included AA batteries; perfect for measuring motors, lathes, machine parts, etc. Accurate to +/- 005 percent and capable of measuring at a distance from 2-20 inches; RPMs measured over 1 second sampling time.

Nylog red: is based on mineral oil and used on Ammonia, Propane, CFC or HCFC systems.

More information about Neiko 20713A #ad


Similar products



Gates 91107 Belt Tension Tester

#ad
#ad
Gates 91107 #ad - Gauge used to help save energy. Gates rubber company 91107 Krikitbelt Tens Tester-. 30lb gauge used to check for worn sheaves. Nylog red: is based on mineral oil and used on Ammonia, Propane, CFC or HCFC systems. Highly accurate non-contact digital tachometer with high speed laser-aim operation and instant readings from 2.

5 to 99, 999 rPM. Its highly reflective surface is designed to retro reflect the light infrared, laser or visible emitted by the optical tachometer. Specially made for use with optical and laser tachometers and revolution counters. Easy to operate; instructions included. Made in USA. Maximum deflection force of 30 lb.

Gates 91107 Belt Tension Tester #ad - Ensures proper belt tension for increased life of drive belt. Readings are displayed on a large, minimum, easy-to-read LCD screen; stores last, and maximum reading; features auto-zero adjustment. Includes 24-inches of reflective tape and aim and measure design for non-contact diagnostics and measurements.

Proper tensioning is necessary to avoid premature belt wear. Compact and lightweight, machine parts, lathes, operates for hours on three included AA batteries; perfect for measuring motors, etc. Accurate to +/- 0

More information about Gates 91107 #ad


Similar products



Fin Comb Kit, 8 to 20 Fins per In.

#ad
#ad
YELLOW JACKET 61158 #ad - Readings are displayed on a large, easy-to-read LCD screen; stores last, minimum, and maximum reading; features auto-zero adjustment. Includes 24-inches of reflective tape and aim and measure design for non-contact diagnostics and measurements. Cushion-grip handle for greater torque and comfort. Price for: each includes: set of six fins, blue 11 and 13, blue, red 18 and 20, size orange 8 and 10, green 12 and 14, lime green 16 and 17, yellow, Yellow 9 and 15 Item: Fin Comb Kit Length: 5" Color: Orange, green, lime, Red Fins per Inch: 8 to 20 Width: 6" Country of Origin subject to change: United States.

Unique, patented head slides back and forth to switch from 1/4-Inch to 5/16-Inch magnetic hex-head screwdriver. Easy to operate; instructions included. Its highly reflective surface is designed to retro reflect the light infrared, laser or visible emitted by the optical tachometer. Adjustable for 10" to 170" belt span and up to 35 pounds of tension.

Fin Comb Kit, 8 to 20 Fins per In. #ad - Fin comb kit, red, color orange, green, fins per Inch 8 to 20, Blue, Yellow, Lime, Length 5 In. Width 6 In. Includes set of six fins, size orange 8 and 10, lime green 16 and 17, green 12 and 14, Red 18 and 20, Blue 11 and 13, Yellow 9 and 15 ' Gauge used to check for worn sheaves. Indicates tension on all v-belt drives 3l, ax, 3V, 5V, 4L, c, A, b, 5L, bx, CX, 8V.

More information about YELLOW JACKET 61158 #ad


Similar products



Audel Industrial Multi-Craft Mini-Ref

#ad
#ad
Audel #ad - Made in USA. Thumb nut locks tip setting. Schrader valves, ball valves, unloaders or other system components. New audel book from bestselling author tom davis topics searchable by machine, or material Heavily illustrated and designed with lay-flat binding for ease of use on the job Includes worked-out examples when math is presented to accelerate learning Building on a rich legacy of titles from the celebrated Audel brand, device, this new addition to their esteemed lineup continues the tradition of delivering trusted content skilled workers reach for the most.

Price for: each includes: set of six fins, red 18 and 20, lime green 16 and 17, yellow, lime, blue 11 and 13, green 12 and 14, yellow 9 and 15 Item: Fin Comb Kit Length: 5" Color: Orange, green, blue, size orange 8 and 10, Red Fins per Inch: 8 to 20 Width: 6" Country of Origin subject to change: United States.

Audel Industrial Multi-Craft Mini-Ref #ad - Including up-to-date focus on "green" thinking and industrial sustainability, welding, pipefitting, this handy, blacksmithing, compact guide serves as an ideal on-the-job reference on topics such as pump facts, wood and carpentry, motor facts, bearing information, and much more. Gauge used to check for worn sheaves.

Specially formulated self adhesive reflective tape for use as a target for optical tachometers. It's a sealant: gaskets coated with Nylog will never dry or become heat fixed to the surface. Cushion-grip handle for greater torque and comfort. Wide angle reflectivity tape, 10 strips, each 8 inches x 0

More information about Audel #ad


Similar products