As an Amazon Associate I earn from qualifying purchases.
VACEXT #ad - This adapter kit converts from 1 7/8 inch to 1-1/4 inch; 1-3/8 inch to 1-1/2 inch; 1-3/8 inch to 1-1/4 Inch; 1-1/2 inch to 1-1/4 inch, 1-1/2 inch to 1-3/8 inch. Wide compatibility: this vacuum dust attachments are suitable for most types of vacuum cleaners with 32mm 1 1/4 inch, shark navigator lift away. By using the long flexible crevice tool, you can remove years of lint build-up deep within dryer gap, exhaust port and dryer vent so your appliance run more safely and efficiently.
Using this crevice tool for dryer vent regularly to clean your dryer vent and help prevent deadly dryer vent fires from sparking.
Package: this dust cleaning attachment kit includes 5* dust vacuum attachmet, we added a new universal vacuum Adapter Kit so this vacuum dust attachments are suitable for MOST types of Shop vacs. Please not this tool kit does not fit dyson, shark vacuum cleaner Shark Rocket, 35mm 1 3/4 inch, NOT FIT Shark Rotator, Kenmore, 42mm vacuum hose diameter. Please not this tool kit does NOT FIT Dyson, 1*flexible crevice tool.
The Dryer Vent Store #ad - Use these to hook up to your vacuum attachments. Four adapter attachments / cone reducer included. If you use with an attachment and it keeps falling off secure with a piece of tape, some attachments are heavier than others. Use these as a converter for your attachments to connect to your vacuum hose.
Connect two together to make one adapter or connect all four together to make one adapter. These vacuum hose connectors are made out of plastic and have either a tapered fit or a step fit.
Both with older vacuums and newer ones measure your vacuum hose and attachment to check the size. One by itself might be all you need. We tested these on newer model vacuums and was able to come up with a combination that worked for most we could find. Note ***please measure your hose end diameter And Compare With Dimensions In Photo To Confirm Fit ***. The smallest adapter is made out of hard plastic. The adapters will fit into each other to make a variety of connectors.
MP Maresh Products #ad - The female opening is tapered from 1. 26 to 1. 19 inch 1 1/4'', 32mm available in 10”, 12” or 14” natural fill floor brush. The robust natural fill completely encompassed the base of the brush and is designed to insure no damage to floor surfaces including hard wood, tile, vinyl, polished stone, nor laminate.
It also works with many stand alone vacuum cleaners such as Dyson, and all other brands which use a 1. 25" diameter hose or wand. Risk free money back. These premium natural bristle bare surface floor brushes are ideal for vacuuming all types of bare surface floors, including marble, parquet, linoleum, laminate, tile, hardwood, concrete and also walls.
The bristles are made from natural horse hair which provides a very soft brush which will not scratch even high gloss floors such as marble. The 180 degree swivel neck allows easy maneuvering around furniture, or underneath tables clearance needed is 3 inches and easily cleans narrow gaps. With industry standard size machine end coupling for vacuum cleaners and Central Vacuums ONLY using 1 ¼ “ wands or vacuum hoses. The diameter of the swivel neck measures 1. 25", dirt devil, beam, md manufacturing, centec, Hoover, VacuFlo, Electrolux, Bissell, Hayden, Hoover, and many others.
The Dryer Vent Store #ad - Note ***please measure your hose end diameter And Compare With Dimensions In Photo To Confirm Fit ***. The adapters will fit into each other to make a variety of connectors. Please note- if you use with an attachment and it keeps falling off secure with a piece of tape, some attachments are heavier than others.
Three adapter attachments / cone reducer included. Just try one till it fits. More details in description. Both with older vacuums and newer ones measure your vacuum hose and attachment to check the size.
Connect two together to make one adapter or connect all three together to make one adapter. These vacuum hose connectors are made out of plastic and have either a tapered fit or a step fit. These are not hard plastic they have some give in material. We tested these on newer model vacuums and was able to come up with a combination that worked for most we could find. We had these designed to fit most standard vacuum hoses up to 1 3/4 inches.
EZ SPARES #ad - Fits most vacuums that accept standard 1 1/4 inch; inside diameter attachments. Fits most vacuums that accept standard 1 1/4 inch; inside diameter attachments. Fits 1 1/4 inches friction-fit wands.
Jetec #ad - Knob size: comes with 4 pieces same size control knobs. 1. 54 inch/ 39 mm; the inner diameter of knob approx. And the control knob’s outer diameter measures approx.
Adapter size: there are 12 pieces adapters in 2 different styles, 4 long and 8 short. The inner diameter of the short adapter measures approx. 6 mm/ 024 inch and the height is 14 mm/ 055 inch; the inner diameter of the long adapter measures approx.
Wonlives #ad - 6 pieces vacuum cleaner attachements includes 1-3/8''35mm to 1-1/4''32mm hose adapter, 1-1/4 inch Nozzle Combination Tool, 1- 1/4 inch utility nozzle, 1- 1/4 inch wet or dry vacuum crevices tool, 1- 1/4 inch horsehair bristles round brush, 1 -1/4 inch upholstery tool.
Vacuum attachments suitable for standard outside 32mm and inside 35 mm diameter size, not suiT for Kenmore progressive Tru Hepa Vacuum, not fit Bissell Powerforce Bayless, Shark VAC, with 35mm1 3/8inch to 32mm 1 1/4 inch adapter this fits perfect adding a lot of versatile attachments for cleaning, shop vac, not fit Ridge.
This is a very nice set of shop vac attachments that adds to the functionality of smaller shop vacuum. The shop vac accessories 1. 25 inch is only for vacuums accepting 35mm or 32mm inner diameter attachents. Great for use in cleaning your cars ，boats ，nooks ，cat hair ，corner, door frames, pictures, etc with these small shop vac attachments.
Global Share-W #ad - 1 1/4'' vacuum attachment wet or dry vacuum crevices tool for cleaning tight spaces. 1-1/4'' nozzle combination Tool, designed to clean the crevice and dust the board. 1 1/4'' utility nozzle with plastic brush, the brush can be removed, for floor cleaning.
The vacuum attachments pieces come with an 1-3/8''35mm to 1-1/4''32mm hose adapter, does not fit Bissell style 12, NOT fit Shark Lift Away Vacuum Cleaner, Does not fit the Shark vacuum, did not fit shopvac.
Mountain Trades #ad - The smallest size they will fit is 1 1/16 inches up to 1 3/4 inches. Adapt different vacuum cleaner attachments that won't work with your vacuums by using these vacuum hose adapters. Use these to connect your power tools vacuum port to your hose in your work shop, with your table saw exhaust port or with your shop vacuums / wet dry vacuums.
Use these as a converter for your attachments to connect to your vacuum hose. Measure the diameter of your hose or attachment and check the dimensions in the photos.
The rubber attachments will fit more of your accessories because they are pliable and hold on to your attachments better because of the rubber material. Just try one till it fits. We tested these on newer model vacuums and was able to come up with a combination that worked for most we could find. What makes these vacuum adapter accessories so useful is that 2 are made from rubber and one from a stiffer plastic the cone adapter.
GIBTOOL #ad - Anti-static Prfect for cleaning sofa, stairs and small areas. Please measure and confirm your vacuum attachments outside diameter before purchasing. 1 1/4'' horsehair bristles round brush, for cleaning and dusting tables and counter tops, air and heating vents, mini and vertical blinds.
1-3/8''35mm to 1-1/4''32mm Hose Adapter. 1 1/4'' vacuum attachment wet or dry vacuum crevices tool for cleaning tight spaces.
1 1/4'' utility nozzle with plastic brush, the brush can be removed, for floor cleaning. 1 1/4'' upholstery tool, ideal attachment for domestic cleaning. 1-1/4'' nozzle combination Tool, designed to clean the crevice and dust the board.
1. VACEXT
#adHousehold Cleaning Kit Attachments Vacuum Cleaner Accessories Universal Vacuum Hose Adapters Flexible Crevice Tool for Dryer Lint Vent Trap Cleaner
#adUsing this crevice tool for dryer vent regularly to clean your dryer vent and help prevent deadly dryer vent fires from sparking.
More information #ad
Universal vacuum adapter kit: if purchasing this dust cleaning attachments, you can get a free vacuum hose adapter kit $9. 95 which can help you resolve the fitting issue. Replacement vacuum attachment for shop-vac, 38mm 1 1/2 inch, NOT FIT Wet/Dry Shop Vac 2 1/2 inch. Main function: you can use this dust cleaner brush to clean your carpet, air vents, personal computer, laptop, drawers, sofa, keyboard, jewelry, bookshelf, plants, furnitures, car vent, remove pet hair and corners. Package: this dust cleaning attachment kit includes 5* dust vacuum attachmet, we added a new universal vacuum Adapter Kit so this vacuum dust attachments are suitable for MOST types of Shop vacs. Please not this tool kit does not fit dyson, shark vacuum cleaner Shark Rocket, 35mm 1 3/4 inch, NOT FIT Shark Rotator, Kenmore, 42mm vacuum hose diameter. Please not this tool kit does NOT FIT Dyson, 1*flexible crevice tool.
| Brand | VACEXT #ad |
| Manufacturer | VACEXT #ad |
| Height | 2.5 Inches |
| Length | 12.5 Inches |
| Width | 2 Inches |
| Part Number | VACEXT |
More information #ad
2. The Dryer Vent Store
#adFits 1 1/16 to 1 3/4 inches -4 Pieces, TDVS Universal Vacuum Hose Adapter Kit Reducer Attachment Set Designed to Fit More Vacuums and Attachments Than Any Other Adapters
#adConnect two together to make one adapter or connect all four together to make one adapter. These vacuum hose connectors are made out of plastic and have either a tapered fit or a step fit.
More information #ad
Use these to connect your power tools vacuum port to your hose in your work shop or with your shop vacuums. Note- 2 adapters come already connected together but come apart easily. The smallest size they will fit is 1 1/16 inches up to 1 3/4 inches. Both with older vacuums and newer ones measure your vacuum hose and attachment to check the size. One by itself might be all you need. We tested these on newer model vacuums and was able to come up with a combination that worked for most we could find. Note ***please measure your hose end diameter And Compare With Dimensions In Photo To Confirm Fit ***. The smallest adapter is made out of hard plastic. The adapters will fit into each other to make a variety of connectors.
| Brand | The Dryer Vent Store #ad |
| Manufacturer | Mountain Trades #ad |
More information #ad
3. MP Maresh Products
#adGenuine MP Soft Touch Deluxe Vacuum Cleaner or Central Vac Hardwood and Bare Floor or Wall Brush. Natural Delicate Horse Hair Bristles for Thorough Cleaning. 10 Inch
#adIt also works with many stand alone vacuum cleaners such as Dyson, and all other brands which use a 1. 25" diameter hose or wand. Risk free money back. These premium natural bristle bare surface floor brushes are ideal for vacuuming all types of bare surface floors, including marble, parquet, linoleum, laminate, tile, hardwood, concrete and also walls.
More information #ad
Compatible with all major brands of vacuums using 1 ¼ ” wands or hose including: Sanitaire, Panasonic, Hoover, Bissell, Electrolux, Shop Vac, Euroclean, Nilfisk, Pro-Team, Kenmore, Eureka, Beam, Oreck and some Dyson models. The bristles are made from natural horse hair which provides a very soft brush which will not scratch even high gloss floors such as marble. The 180 degree swivel neck allows easy maneuvering around furniture, or underneath tables clearance needed is 3 inches and easily cleans narrow gaps. With industry standard size machine end coupling for vacuum cleaners and Central Vacuums ONLY using 1 ¼ “ wands or vacuum hoses. The diameter of the swivel neck measures 1. 25", dirt devil, beam, md manufacturing, centec, Hoover, VacuFlo, Electrolux, Bissell, Hayden, Hoover, and many others.
| Brand | MP Maresh Products #ad |
| Manufacturer | MP Maresh Products #ad |
| Weight | 0.51 Pounds |
| Part Number | MP-13331-10 |
More information #ad
4. The Dryer Vent Store
#adFits 1 1/16 to 1 3/4 inches -3 Pieces, TDVS Universal Vacuum Hose Adapter Kit Reducer Attachment Designed to Fit More Vacuums Than Any Other Adapters
#adThree adapter attachments / cone reducer included. Just try one till it fits. More details in description. Both with older vacuums and newer ones measure your vacuum hose and attachment to check the size.
More information #ad
Use these to connect your power tools vacuum port to your hose in your work shop or with your shop vacuums. Use these to hook up to your vacuum attachments. One by itself might be all you need. Connect two together to make one adapter or connect all three together to make one adapter. These vacuum hose connectors are made out of plastic and have either a tapered fit or a step fit. These are not hard plastic they have some give in material. We tested these on newer model vacuums and was able to come up with a combination that worked for most we could find. We had these designed to fit most standard vacuum hoses up to 1 3/4 inches.
| Brand | The Dryer Vent Store #ad |
| Manufacturer | The Dryer Vent Store #ad |
| Part Number | 5841499637 |
More information #ad
5. EZ SPARES
#adEZ SPARES 7PCS Micro Vacuum Attachment Keyboard Crevice Cleaning Tool Brush Kit7PCS
#adMore information #ad
35 mm adapter included for european sized friction-fit wands, Electrolux, Bosch, Sebo, Hoover, Eureka, Bissell, Dirt Devil, Shark, Works With Miele Vacuums, Fuller Brush and more. 7pcs universal Micro Tool Kit for most brand vacuum cleaner.| Brand | EZ SPARES #ad |
| Manufacturer | EZ SPARES #ad |
| Height | 7.08 Inches |
| Length | 7.48 Inches |
| Weight | 0.39 Pounds |
| Width | 2.36 Inches |
| Part Number | B07457CBCT |
More information #ad
6. Jetec
#ad4 Pack Black Control Knobs Replacement with 12 Adapters for Oven/ Stove/ Range
#adAdapter size: there are 12 pieces adapters in 2 different styles, 4 long and 8 short. The inner diameter of the short adapter measures approx. 6 mm/ 024 inch and the height is 14 mm/ 055 inch; the inner diameter of the long adapter measures approx.
More information #ad
8 mm/ 031 inch and the height is 26 mm/ 1. 02 inch. Convenient for your installation and daily usage;Please consider the size carefully. Please make sure the insert size 043 inch/ 11 mm inner diameter is suitable for your machine before purchasing. 043 inch/ 11 mm.| Brand | Jetec #ad |
| Manufacturer | Jetec #ad |
| Height | 0.98 Inches |
| Length | 4.33 Inches |
| Width | 3.94 Inches |
| Part Number | Jetec-Control Knobs-2 |
| Model | Jetec-Control Knobs-2 |
More information #ad
7. Wonlives
#adVacuum Attachments 32 mm 1 1/4 inch to 35 mm （1 3/8 inch）Shop Vac Accessories Brush Nozzle Crevice Tool for Standard Hose
#adVacuum attachments suitable for standard outside 32mm and inside 35 mm diameter size, not suiT for Kenmore progressive Tru Hepa Vacuum, not fit Bissell Powerforce Bayless, Shark VAC, with 35mm1 3/8inch to 32mm 1 1/4 inch adapter this fits perfect adding a lot of versatile attachments for cleaning, shop vac, not fit Ridge.
More information #ad
Please measure and confirm your vacuum attachments inner diameter before purchasing. 1 1/4 shop vac attachments can convert different sizes with 1-3/8''35mm to 1-1/4''32mm Hose Adapter, If NOT fit your vaccum cleaner you can contact with us, we will solve it asap. This is a very nice set of shop vac attachments that adds to the functionality of smaller shop vacuum. The shop vac accessories 1. 25 inch is only for vacuums accepting 35mm or 32mm inner diameter attachents. Great for use in cleaning your cars ，boats ，nooks ，cat hair ，corner, door frames, pictures, etc with these small shop vac attachments.
| Brand | Wonlives #ad |
| Part Number | 8542020098 |
| Model | 8542020098 |
More information #ad
8. Global Share-W
#adVacuum Attachments Replacement 1 1/4 inch & 1 3/8 inch Vacuum Cleaner Accessories Brush Kit for Standard Hose Set of 6
#adThe vacuum attachments pieces come with an 1-3/8''35mm to 1-1/4''32mm hose adapter, does not fit Bissell style 12, NOT fit Shark Lift Away Vacuum Cleaner, Does not fit the Shark vacuum, did not fit shopvac.
More information #ad
It is small vacuum attachments, Please measure and confirm your vacuum attachments outside diameter before purchasing. Did not fit Kenmore vacuum. 1 1/4'' horsehair bristles round brush, air and heating vents, for cleaning and dusting tables and counter tops, mini and vertical blinds. This vacuum cleaner accessory is only suitable for vacuum cleaner models with a diameter of 32 mm.| Brand | Global Share-W #ad |
| Manufacturer | Global Share-W #ad |
More information #ad
9. Mountain Trades
#adUse With Central Vac Accessories 3 Pieces, Universal Vacuum Hose Adapter Kit Vac Reducer Attachment Flexible Rubber Vacuum Cleaner Hose Adapter Dust Collection Connector Fits 1 1/16 To 1 3/4 in
#adUse these as a converter for your attachments to connect to your vacuum hose. Measure the diameter of your hose or attachment and check the dimensions in the photos.
More information #ad
The adapters will fit into each other to make a variety of connectors. Connect two together to make one adapter or one by itself might be all you need. The rubber attachments will fit more of your accessories because they are pliable and hold on to your attachments better because of the rubber material. Just try one till it fits. We tested these on newer model vacuums and was able to come up with a combination that worked for most we could find. What makes these vacuum adapter accessories so useful is that 2 are made from rubber and one from a stiffer plastic the cone adapter.
| Brand | Mountain Trades #ad |
| Manufacturer | Mountain Trades #ad |
More information #ad
10. GIBTOOL
#adGIBTOOL Vacuum Attachments Accessories Cleaning Kit Brush Nozzle Crevice Tool for 1 1/4 inch & 1 3/8 inch Standard Hose 6pcs
#ad1-3/8''35mm to 1-1/4''32mm Hose Adapter. 1 1/4'' vacuum attachment wet or dry vacuum crevices tool for cleaning tight spaces.
More information #ad
6 pieces vacuum cleaner attachements accessory kit includes crevice tool, utility nozzle with brush, and 35mm1 3/8inch to 32mm 1 1/4 inch adapter, upholstery tool, brush & nozzle combination tool, horsehair bristles round brush, The kit is only for vacuums accepting 35mm or 32mm outside diameter attachments.11 1/4'' utility nozzle with plastic brush, the brush can be removed, for floor cleaning. 1 1/4'' upholstery tool, ideal attachment for domestic cleaning. 1-1/4'' nozzle combination Tool, designed to clean the crevice and dust the board.
| Brand | GIBTOOL #ad |
| Manufacturer | GIBTOOL #ad |
| Weight | 0.07 Pounds |
| Part Number | B01L1SKINI |
| Model | SCGH0032 |
More information #ad
