Hydronix CB-45-1005 NSF Carbon Block Filter 4.5″ OD X 9 7/8″ Length, 5 Micron

Hydronix CB-45-1005 NSF Carbon Block Filter 4.5″ OD X 9 7/8″ Length, 5 Micron

#ad
#ad
Hydronix CB-45-1005 #ad - Particle retention size of 5 micron. 4. 5" od and an overall length of 9-7/8". The performance of filters is measured by the minimum particle size that is blocked, the maximum flow rate, the downstream concentration of unwanted chemicals, the percentage of particles or microorganisms that are removed, and the amount of water that can be filtered before the filter must be replaced.

Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. It has an operating temperature range of 40 to 180 degrees F, and a maximum pressure rating of 250 pounds per square inch psi. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization.

Hydronix CB-45-1005 NSF Carbon Block Filter 4.5" OD X 9 7/8" Length, 5 Micron #ad - Meets ansi/nsf standard 42 certification for material requirements only. Coconut shell carbon filter media with polypropylene outer/inner wrap, end caps and netting. The company, is headquartered in Chino Hills, founded in 2010, CA. It has coconut shell activated carbon filter media to reduce unpleasant taste and odor from drinking water.

This filter has a 4. 5" outside diameter OD and an overall length of 9-7/8". This carbon block filter is certified by the National Sanitation Foundation NSF Standard 42 for material requirements only, and is suitable for use in water dispensing applications where higher chlorine levels are present.

More information about Hydronix CB-45-1005 #ad

Hydronix SDC-45-1005 NSF Sediment Filter 4.5" OD X 9 7/8" Length, 5 Micron

#ad
#ad
Hydronix SDC-45-1005 #ad - 5 micron fine sediment filter for cleaner water. The hydronix sdc-45-1005 sediment water filter is a 100% pure polypropylene cartridge. It is a perfect pre-filter for reducing sand, silt, rust and scale, and is a compatible replacement cartridge for many brands of 10-inch Big Blue sediment filters. Materials ansi/nsf Standard 42 tested and certified.

Hydronix SDC-45-1005 NSF Sediment Filter 4.5" OD X 9 7/8" Length, 5 Micron #ad - Graded density for higher dirt holding capacity. For optimum dirt-holding, replace about every 2-3 months.

More information about Hydronix SDC-45-1005 #ad


Similar products



Hydronix CB-45-1010 Whole House or Commercial NSF Coconut Activated Carbon Block Water Filter, 4.5" x 10" - 10 Micron

#ad
#ad
Hydronix CB-45-1010 #ad - 4. 5 x 10 inches. 5 micron fine sediment filter for cleaner water. Hydronix cb-45-1010 carbon block filters are manufactured with NSF certified, Coconut shell activated carbon to reduce unpleasant taste, safe, odor, chlorine and other contaminants from Drinking water. Materials ansi/nsf Standard 42 tested and certified.

Hydronix coconut shell carbon blocks have great cost to performance value, have high chlorine reduction capabilities, great dirt holding performance, and offer exceptional value and performance over other similar filters in the market. Hydronix cb-45-1010 carbon block filters are NSF/ANSI standard 42 certified for Material and structural Safety.

Hydronix CB-45-1010 Whole House or Commercial NSF Coconut Activated Carbon Block Water Filter, 4.5" x 10" - 10 Micron #ad - This carbon block filter is suitable for use in water dispensing applications where higher chlorine levels are present. The operating temperature range is 40 to 180 Degrees F, and has a maximum pressure rating of 250 pounds per square inch psi. Nsf/ansi standard 42 certified. The filter has a 4. 5" outside diameter OD and an total length of 9-7/8".

Cb-45-1010 filters have a particle retention Size of 10 microns, and are suitable for Drinking water filtration applications. Carbon block filter technology - 10 micron. Coconut shell carbon for better taste and performance.

More information about Hydronix CB-45-1010 #ad


Similar products



Hydronix CB-45-1001 NSF Carbon Block Filter 4.5" OD X 9 7/8" Length, 1 Micron

#ad
#ad
Hydronix CB-45-1001 #ad - Carbon block filter technology - 10 micron. Carbon block filter for a water filtration system. High chlorine reduction. The company, is headquartered in Chino Hills, founded in 2010, CA. Coconut shell carbon for better taste and performance. They are made of densely packed synthetic or natural fibers that trap suspended particles, or substances that cause a chemical change, materials that block microbes or adsorb unwanted chemicals, such as acid neutralization.

Materials ansi/nsf Standard 42 tested and certified. This carbon block filter is certified by the National Sanitation Foundation NSF Standard 42 for material requirements only, and is suitable for use in water dispensing applications where higher chlorine levels are present. Water filters remove undesirable particles, adsorption, chemicals, and microorganisms from water by means of a semipermeable barrier, or biological processes.

Hydronix CB-45-1001 NSF Carbon Block Filter 4.5" OD X 9 7/8" Length, 1 Micron #ad - 5 micron fine sediment filter for cleaner water. For optimum dirt-holding, replace about every 2-3 months. Meets ansi/nsf standard 42 certification for material requirements only. This hydronix cb-45-1001 carbon block filter has a particle retention size of 1 micron, and is suitable for drinking water filtration applications.

This filter has a 4. 5" outside diameter OD and an overall length of 9-7/8".

More information about Hydronix CB-45-1001 #ad


Similar products



Hydronix SWC-45-1030 String Wound Filter 4.5" OD X 10" Length, 30 Micron

#ad
#ad
Hydronix SWC-45-1030 #ad - The performance of filters is measured by the minimum particle size that is blocked, the downstream concentration of unwanted chemicals, the maximum flow rate, the percentage of particles or microorganisms that are removed, and the amount of water that can be filtered before the filter must be replaced.

Coconut shell carbon for better taste and performance. This filter can withstand temperatures ranging from 40 to 165 degrees F. 4. 5" od and an overall length of 9-7/8". Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. Carbon block filter for a water filtration system.

Hydronix SWC-45-1030 String Wound Filter 4.5" OD X 10" Length, 30 Micron #ad - Particle retention size of 1 micron. Operating temperature range of 40 to 165 degrees F. Nsf/ansi standard 42 certified. They are made of densely packed synthetic or natural fibers that trap suspended particles, or substances that cause a chemical change, materials that block microbes or adsorb unwanted chemicals, such as acid neutralization.

High chlorine reduction. For optimum dirt-holding, replace about every 2-3 months. Polypropylene fiber cord for resistance to most chemicals, dimensional stability, and sterilizable.

More information about Hydronix SWC-45-1030 #ad


Similar products



Pentek 151122 OR-100 Buna-N O-ring for Big Blue Housings

#ad
#ad
Pentair Industries TIER1-OR-100 #ad - For optimum dirt-holding, replace about every 2-3 months. It has a diameter of 5-3/4 inches and is made of nitrile butadiene rubber Buna-N for flexibility and resistance to abrasion and tearing. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants.

5 micron fine sediment filter for cleaner water. Meets ansi/nsf standard 42 certification for material requirements only. Water filters are used in a wide range of applications, including drinking water purification, and irrigation, swimming pools, industrial processes, among others. Pentair manufactures industrial, commercial, and residential water filtration components and systems.

Pentek 151122 OR-100 Buna-N O-ring for Big Blue Housings #ad - 4. 5 x 10 inches. Coconut shell carbon filter media with polypropylene outer/inner wrap, end caps and netting. Type: O-Ring. Material: Buna-N. For use with: pentek, pentair Water - Big Blue Housings Only. String-wound sediment filter for a water filtration system. Graded density for higher dirt holding capacity. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings.

More information about Pentair Industries TIER1-OR-100 #ad


Similar products



Hydronix SWC-45-1020 String Wound Filter 4.5" OD X 10" Length, 20 Micron

#ad
#ad
Hydronix SWC-45-1020 #ad - Particle retention size of 30 micron. High chlorine reduction. Hydronix 20 micron polypropylene String Wound Sediment Filter | 4. 5 x 10 5 micron fine sediment filter for cleaner water. String-wound sediment filter for a water filtration system. Package Quantity: 1 Piece. Materials ansi/nsf Standard 42 tested and certified.

Hydronix SWC-45-1020 String Wound Filter 4.5" OD X 10" Length, 20 Micron #ad - Type: O-Ring. Carbon block filter technology - 10 micron. For use with: pentek, pentair Water - Big Blue Housings Only. Material: Buna-N. Carbon block filter for a water filtration system. 4. 5" od and an overall length of 10". For optimum dirt-holding, replace about every 2-3 months. Hydronix- genuine Replacement Part- Certified Contaminant Reduction.

4. 5" od and an overall length of 9-7/8". Operating temperature range of 40 to 165 degrees F. Particle retention size of 1 micron. 4. 5 x 10 inches.

More information about Hydronix SWC-45-1020 #ad


Similar products



Pentek 150237 #10 Big Blue Filter Housing, 1" Female NPT Inlet/Outlet

#ad
#ad
Pentair Industries 1" Big Blue NPT #ad - 5 micron fine sediment filter for cleaner water. Type: O-Ring. High chlorine reduction. Coconut shell carbon for better taste and performance. String-wound sediment filter for a water filtration system. A pressure relief button on the inlet side of the cap releases pressure in the housing for changing filter cartridges.

The performance of filters is measured by the minimum particle size that is blocked, the maximum flow rate, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, and the amount of water that can be filtered before the filter must be replaced.

Pentek 150237 #10 Big Blue Filter Housing, 1" Female NPT Inlet/Outlet #ad - Meets ansi/nsf standard 42 certification for material requirements only. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Package Quantity: 1 Piece. The housing can be used with a 10” x 4-1/2” filter cartridge sold separately.

Particle retention size of 1 micron. 4. 5" od and an overall length of 10". Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. Hydronix- genuine Replacement Part- Certified Contaminant Reduction.

More information about Pentair Industries 1" Big Blue NPT #ad


Similar products



Pentek, Pentair Water 151122 Replacement for OEM Size Big Blue O-Ring Buna-N ORing 3 Pack - Captain O-Ring

#ad
#ad
Captain O-Ring LLC #ad - Includes 3 replacement o-rings also called seals or gaskets to repair your leaking water filter housing OEM UPC: 051678511220, 885343762095. Initial pressure drop of 1 psi at a flow rate of 15 gpm. Carbon block filter technology - 10 micron. Polypropylene fiber cord for resistance to most chemicals, dimensional stability, and sterilizable.

Part: pentek water 151122 O-Ring 3 Pack. Materials ansi/nsf Standard 42 tested and certified. Captain o-ring" is a registered trademark of Captain O-Ring LLC. Coconut shell carbon for better taste and performance. Material: Buna-N. Particle retention size of 1 micron. It has an inside diameter of 5-1/2" and outside diameter of just over 5-3/4 inches and is made of nitrile butadiene rubber Buna-N for flexibility and resistance to abrasion and tearing.

Pentek, Pentair Water 151122 Replacement for OEM Size Big Blue O-Ring Buna-N ORing 3 Pack - Captain O-Ring #ad - Particle retention size of 30 micron. Direct replacement for the following part numbers see description below for full water filter compatibility list: ace hardware 4001756; American Plumber 152032, 01019189; Pentek 151122, W10-OR; APEC O-RING-HB; Ametek Kleen-Plus 151122-03; Culligan OR-100, 151122-27, BB BUNA-N.

Manufactured and warrantied by Captain O-Ring LLC, with decades of experience in the sealing and chemical industry. Operating temperature range of 40 to 165 degrees F. For use with: pentek, pentair Water - Big Blue Housings Only.

More information about Captain O-Ring LLC #ad


Similar products



Housing Bracket for Big blue 10" and 20" filter housings

#ad
#ad
Watts BRK1-45100-PCL #ad - Direct replacement for the following part numbers see description below for full water filter compatibility list: ace hardware 4001756; American Plumber 152032, W10-OR; APEC O-RING-HB; Ametek Kleen-Plus 151122-03; Culligan OR-100, 01019189; Pentek 151122, 151122-27, BB BUNA-N. Manufactured and warrantied by Captain O-Ring LLC, with decades of experience in the sealing and chemical industry.

Housing Bracket for Big blue 10" and 20" filter housings #ad - Important note: units DO NOT include the nuts and washers. Coconut shell carbon for better taste and performance. 4. 5 x 10 inches. Hydronix- genuine Replacement Part- Certified Contaminant Reduction. 151122 oem size o-rings are approximately 5. 5" inside Diameter x 5. 83" outside Diameter x 0165" thickness. Carbon block filter for a water filtration system.

Carbon block filter technology - 10 micron. Particle retention size of 30 micron. Meets ansi/nsf standard 42 certification for material requirements only. White powder coated steel twin mounting bracket for 5000 Series, 10000 Series, and YTB 10" & YTB 20" Filter Housings.

More information about Watts BRK1-45100-PCL #ad


Similar products



Hydronix CB-45-1005 Compatible NSF Carbon Block Filter 4.5" OD X 9 7/8" Length, 5 Micron by CFS

#ad
#ad
Complete Filtration Services CFS-405 #ad - Meets ansi/nsf standard 42 certification for material requirements only. 151122 oem size o-rings are approximately 5. 5" inside Diameter x 5. 83" outside Diameter x 0165" thickness. Dimensions: overall Height - Top to Bottom: -9. 75". 5 micron fine sediment filter for cleaner water. Large filter housing for high-flow and heavy sediment applications.

Polypropylene fiber cord for resistance to most chemicals, dimensional stability, and sterilizable. Gac filters. Drop-in cartridge provides quick and easy filter change. Reinforced polypropylene sump for strength and chemical resistance. Any use of the brand name or model designation for this product is made solely for purposes of demonstrating compatibility.

Hydronix CB-45-1005 Compatible NSF Carbon Block Filter 4.5" OD X 9 7/8" Length, 5 Micron by CFS #ad - Hydronix- genuine Replacement Part- Certified Contaminant Reduction. Particle retention size of 1 micron. Part: pentek water 151122 O-Ring 3 Pack. Includes 3 replacement o-rings also called seals or gaskets to repair your leaking water filter housing OEM UPC: 051678511220, 885343762095. Drop in cartridge provides quick and easy filter change.

Filter housing mounting bracket for Big Blue 10" and 20" Filter Housings.

More information about Complete Filtration Services CFS-405 #ad


Similar products